Vaccine Storage Refrigerator

The MPR-S313-PA pharmaceutical refrigerator for storage of vaccines offers a complete and integrated solution for the increased requirements of achieving strict storage temperatures for pharmaceuticals, medicines, vaccines and other temperature sensitive biological samples. The slim front-to-back design with four sliding doors fits seamlessly into your facility.

The MPR-S313-PA vaccine storage fridge provides an ergonomic design for easy access to products, effective temperature controls and a space saving design.

Superior Temperature Uniformity

Fans in the MPR-S313-PA ensure gentle air circulation to provide uniform top to bottom temperature control after frequent door openings. The digital display shows temperature reading in the gradients of 1°C. The configurable temperature for pharmaceutical refrigerators ranges from 2° to 14°C. A thermistor sensor monitors temperature inside the chamber. The circulation fan provides rapid temperature adjustment for a highly reliable, stable preservation environment unaffected by ambient temperature.

Remarkable Cooling Efficiency

A highly efficient hermetic compressor provides efficient cooling and maintains temperature level.

Ergonomic Design

The ergonomic design of the MPR series immunization refrigerator provides a clear view of stored items through the large glass panels. The slim profile also allows for quick retrieval of all products. Due to the space saving design, less installation space is required. Two dual paned sliding glass doors seal tightly to maintain uniformity.

Microprocessor Controls

Comprehensive setpoint, alarm, monitoring and diagnostic functions are based on the PHC built microprocessor controller with digital display of all input/output functions. The microprocessor and the electronic temperature controls ensure the set temperature is maintained.

Validated Storage of Vaccines

The PHCbi plenum for this vaccine storage fridge allows for uniform cold airflow distribution throughout the chamber to ensure temperature uniformity. This is essential for validated storage requirements.

Cycle Defrost System

Defrosting is performed automatically during compressor “off” cycles by sensing frost levels. This way defrosting is performed only when required, further protecting the contents against unnecessary temperature rise. The defrosting heater also acts as an emergency heat source to prevent samples from freezing in extremely low ambient temperature conditions (below 0°C).

Safety for Storage of Vaccines

Audible and flashing LED visual alarms alter you to the unlikely event of either a high or low temperature condition. If the inside temperature rises abnormally, an overshooting prevention circuit automatically switches off the fan motor or heater.

Energy Star® Certified Pharmacy Refrigerator

PHC offers an integrated solution for precise storage temperatures necessary for pharmaceuticals, medicines, vaccines and other temperature sensitive biologicals.

The MPR-514-PA Pharmacy and Vaccine Refrigerator offers a complete and integrated solution for the increased requirements of achieving strict and reliable storage temperatures. The slim front-to-back design and optional sliding shelves allow for ergonomic retrieval of your product while fitting seamlessly into your facility.

Superior Temperature Uniformity

Fan-forced air circulation in the MPR-514-PA allows for precise temperature uniformity, even after frequent door openings. It is ideal for highly reliable storage of pharmaceuticals, medicines, vaccines and other temperature sensitive materials.

Remarkable Cooling Efficiency

A highly efficient hermetic compressor provides efficient cooling and maintains the set temperature level. A thermistor sensor monitors temperature inside the chamber. The microprocessor and the electronic temperature controls ensure the set temperature is maintained. Even with frequent door openings, the circulation fan provides rapid temperature adjustment for a highly reliable, stable preservation environment that is unaffected by ambient temperature.

Ergonomic Design

The ergonomic design of this pharmaceutical vaccine refrigerator provides a clear view of stored items through the large framed windows. The slim profile allows for easy retrieval of all products, while the space saving design ensures less installation space is required. The two, easy-to-open, dual paned sliding glass doors seal tightly to maintain uniformity.

Microprocessor Controller and Alarms

Comprehensive setpoint, alarm, monitoring and diagnostic functions are maintained by a PHC built microprocessor controller with digital display. Audible and flashing LED visual alarms alert you to the unlikely event of either a high or low temperature condition. If the inside temperature rises abnormally, an overshooting prevention circuit automatically switches off the fan motor or heater.

Cycle Defrost System

Defrosting is performed automatically during compressor “off” cycles by sensing frost levels. This ensures defrosting is performed only when required which protects contents against unnecessary temperature rise. The defrosting heater also acts as an emergency heat source to prevent samples from freezing in extremely low ambient temperature conditions (below 0°C).

Validated Storage

The PHCbi plenum design allows for uniform cold airflow distribution throughout the chamber to ensure temperature uniformity. This is essential for validated storage requirements.

Refrigerants

This model operates on new generation SNAP compliant, low flammability HFO refrigerants to assure low environmental impact. The use of SNAP compliant refrigerants (Significant New Alternatives Policy) established by the United States Environmental Protection Agency underscores our recognition of social responsibility and environmental sustainability by integrating the latest refrigeration technology. For more information on SNAP refrigerants visit https://www.epa.gov/snap.

Energy Star® Certified Vaccine Refrigerator

PHC offers an integrated solution for precise storage temperatures necessary for pharmaceuticals, medicines, vaccines and other temperature sensitive biologicals.

The MPR-514R-PA Pharmacy and Vaccine Fridge offers a complete and integrated solution for the increased requirements of achieving strict and reliable storage temperatures. The slim front-to-back design and optional sliding shelves allow for an ergonomic retrieval of your product while fitting seamlessly into your facility.

Superior Temperature Uniformity

Fan-forced air circulation in the MPR-514R-PA allows for precise temperature uniformity, even after frequent door openings. It is deal for highly reliable CDC vaccine storage of pharmaceuticals, medicines and other temperature sensitive materials.

Remarkable Cooling Efficiency

A highly efficient hermetic compressor provides efficient cooling and maintains the set temperature level. A thermistor sensor monitors temperature inside the chamber. The microprocessor and the electronic temperature controls ensure the set temperature is maintained. Even with frequent door openings, the circulation fan provides rapid temperature adjustment for a highly reliable, stable preservation environment that is unaffected by ambient temperature.

Ergonomic Design

The ergonomic design of this vaccine fridge provides a clear view of stored items through the large framed windows. The slim profile allows for easy retrieval of all products. The space saving design ensures less installation space is required. The two, easy-to-open, dual paned sliding glass doors seal tightly to maintain uniformity.

Microprocessor Controller and Alarms

Comprehensive setpoint, alarm, monitoring and diagnostic functions are maintained by the PHC built microprocessor controller with digital display. Audible and flashing LED visual alarms alert you to the unlikely event of either a high or low temperature condition. If the inside temperature rises abnormally, an overshooting prevention circuit automatically switches off the fan motor or heater.

Cycle Defrost System

Defrosting is performed automatically during compressor “off” cycles by sensing frost levels. This ensures defrosting is performed only when required which protects contents against unnecessary temperature rise. The defrosting heater also acts as an emergency heat source to prevent samples from freezing in extremely low ambient temperature conditions (below 0°C).

Validated Storage

The PHCbi plenum design allows for uniform cold airflow distribution throughout the chamber to ensure temperature uniformity. This is essential for validated storage requirements.

Refrigerants

This model operates on new generation SNAP compliant, low flammability HFO refrigerants to assure low environmental impact. The use of SNAP compliant refrigerants (Significant New Alternatives Policy) established by the United States Environmental Protection Agency underscores our recognition of social responsibility and environmental sustainability by integrating the latest refrigeration technology. For more information on SNAP refrigerants visit https://www.epa.gov/snap.

Energy Star Certified Large Capacity Refrigerators for Vaccines

The MPR-1014-PA Energy Star Certified vaccine storage refrigerator offers a complete and integrated solution for the increased requirements of achieving strict storage temperatures for pharmaceuticals, medicines, vaccines and other temperature sensitive biological samples. The slim front-to-back design and optional sliding shelves allow for ergonomic and accessible retrieval of your product, while fitting seamlessly into your facility.

The MPR-1014-PA refrigerator for vaccines provides effective temperature controls and a space saving design.

Superior Temperature Uniformity

Forced air circulation allows for precise temperature uniformity, even after frequent door openings. The digital display shows temperature readings in the gradients of 1°C. The configurable temperature for pharmaceutical refrigerators ranges from 2° to 14°C. A thermistor sensor monitors chamber temperature while the circulation fan provides rapid temperature adjustment for a highly reliable, stable preservation environment that is unaffected by ambient temperature.

Remarkable Cooling Efficiency

A highly efficient hermetic compressor provides efficient cooling and maintains temperature level.

Ergonomic Design

The ergonomic design of MPR series refrigerators for vaccination storage provides a clear view of stored items through the large glass panels. The slim profile also allows for quick retrieval of all products. Due to the space saving design, less installation space is required. Two dual paned sliding glass doors seal tightly to maintain uniformity.

Microprocessor Controls

The PHCbi microprocessor includes comprehensive setpoint, alarms, monitoring and diagnostic functions. The microprocessor and the electronic temperature controls ensure the set temperature is maintained.

Validated Vaccination Storage

The PHCbi plenum for this Energy Star® Certified vaccine storage refrigerator allows for uniform cold air flow distribution throughout the chamber to ensure temperature uniformity. This is essential for validated storage requirements.

Cycle Defrost System

Defrosting is performed automatically during compressor “off” cycles by sensing frost levels. This ensures defrosting is performed only when required, further protecting the contents against unnecessary temperature rise. The defrosting heater also acts as an emergency heat source to prevent samples from freezing in extremely low ambient temperature conditions (below 0°C).

Vaccination Storage Safety

Audible and flashing LED visual alarms alert you to the unlikely event of either a high or low temperature condition. If the inside temperature rises abnormally, an overshooting prevention circuit automatically switches off the fan motor or heater.

Energy Star Certified Large Capacity Medical Refrigerator for Vaccines

The MPR-1014R-PA Energy Star Certified fridge for vaccines offers a complete and integrated solution for the increased requirements of achieving strict storage temperatures for pharmaceuticals, medicines, vaccines and other temperature sensitive biological samples. The slim front-to-back design and optional sliding shelves allows for an ergonomic and accessible retrieval of your product, while fitting seamlessly into your facility.

The MPR-1014R-PA medical refrigerator for vaccines provides effective temperature controls and a space saving design.

Superior Temperature Uniformity

Forced air circulation in the MPR-1014R-PA allows for precise temperature uniformity, even after frequent door openings. The digital display shows temperature reading in the gradients of 1°C. The configurable temperature for pharmaceutical refrigerators ranges from 2° to 14°C. A thermistor sensor monitors temperature inside the chamber. The circulation fan provides rapid temperature adjustment for a highly reliable, stable preservation environment unaffected by ambient temperature.

Remarkable Cooling Efficiency

A highly efficient hermetic compressor provides efficient cooling and maintains temperature level.

Ergonomic Design

The ergonomic design of the MPR series medical refrigerators for vaccines provides a clear view of stored items through the large glass panels. The slim profile also allows for quick retrieval of all products. Due to the space saving design, less installation space is required. Two dual paned sliding glass doors seal tightly to maintain uniformity.

Microprocessor Controls

Comprehensive setpoint, alarm, monitoring and diagnostic functions are based on PHC built microprocessor controller with digital display of all input/output functions. The microprocessor and the electronic temperature controls ensure that the set temperature is maintained.

Validated Fridge for Vaccine Storage

The PHCbi plenum for this Energy Star® Certified medical refrigerator for vaccines allows for uniform cold air flow distribution throughout the chamber to ensure temperature uniformity. This is essential for validated storage requirements.

Cycle Defrost System

Defrosting is performed automatically during compressor “off” cycles by sensing frost levels. This ensures defrosting is performed only when required, further protecting the contents against unnecessary temperature rise. The defrosting heater also acts as an emergency heat source to prevent samples from freezing in extremely low ambient temperature conditions (below 0°C).

Medical Refrigerator for Vaccine Safety

Audible and flashing LED visual alarms alter you to the unlikely event of either a high or low temperature condition. If the inside temperature rises abnormally, an overshooting prevention circuit automatically switches off the fan motor or heater.

Energy Saving Pharmaceutical Refrigerator

The MPR-722-PA is an upright pharmaceutical refrigerator offering a stable and reliable environment for managing clinical, pharmaceutical and industrial research at uniform temperatures. Easy to use features and design and precise temperature control provides the ideal climate for various laboratory procedures including biomedical storage and processing.

SNAP Refrigerants and PHC Compliance with EPA Recommendations

Model MPR-722-PA operates on new generation SNAP compliant, low flammability HFO refrigerants to assure low environmental impact. The use of SNAP compliant refrigerants (Significant New Alternatives Policy) established by the United States Environmental Protection Agency underscores our recognition of social responsibility and environmental sustainability by integrating the latest refrigeration technology. For information on SNAP refrigerants visit https://www.epa.gov/snap.

Adjustable Design

This eco-friendly pharmaceutical refrigerator offers a practical solution for storage with adjustable shelves and a wide setpoint range for varying laboratory applications, including biomedical storage and processing. The interior layout makes it ideal for running experiments that require changeable shelf configurations. The shelves can be arranged to accommodate all heights, and deep and strong enough to hold processing equipment and most devices.

Cycle Defrost System

Defrosting is performed automatically and only when required, protecting contents against unnecessary temperature rise. The defrosting heater provides protection from freezing in extremely low ambient temperature conditions.

Microprocessor Controller and Alarms

The temperature control system, with a microprocessor, maintains true temperature at the set level and is unaffected by outside ambient temperature. Audible and flashing LED visual alarms alert the user to the unlikely event of either a high or low temperature status.

Uniform Temperature with Forced Air Circulation

The fan-forced air circulation and efficient temperature recovery properties allow for precise temperature conditions.

Efficient and Superior Upright Pharmacy Refrigerator

High performance compressors and components deliver fast temperature pull-down, recovery and tolerance for high ambient temperature conditions. This energy efficient system improves LEED scores and contributes to global sustainability.

Energy Saving Pharmaceutical Refrigerator

The MPR-722R-PA is an upright pharmacy refrigerator offering a stable and reliable environment for managing clinical, pharmaceutical and industrial research at uniform temperatures. Easy to use features and design and precise temperature control provides the ideal climate for various laboratory procedures including biomedical storage and processing.

SNAP Refrigerants and PHC Compliance with EPA Recommendations

Model MPR-722R-PA operates on new generation SNAP compliant, low flammability HFO refrigerants to assure low environmental impact. The use of SNAP compliant refrigerants (Significant New Alternatives Policy) established by the United States Environmental Protection Agency underscores our recognition of social responsibility and environmental sustainability by integrating the latest refrigeration technology. For information on SNAP refrigerants visit https://www.epa.gov/snap.

Adjustable Design

This eco-friendly pharmaceutical refrigerator offers a practical solution for storage with adjustable shelves and a wide setpoint range for varying laboratory applications, including biomedical storage and processing. The interior layout makes it ideal for running experiments that require changeable shelf configurations. The shelves can be arranged to accommodate all heights, and deep and strong enough to hold processing equipment and most devices.

This model is fitted with stainless steel pull out drawers. These drawers are deep enough to hold large bottles of reagent kits. They also allow convenient and space efficient storage.

Cycle Defrost System

Defrosting is performed automatically and only when required, protecting contents against unnecessary temperature rise. The defrosting heater provides protection from freezing in extremely low ambient temperature conditions.

Microprocessor Controller and Alarms

The temperature control system, with a microprocessor, maintains true temperature at the set level and is unaffected by outside ambient temperature. Audible and flashing LED visual alarms alert the user to the unlikely event of either a high or low temperature status.

Uniform Temperature with Forced Air Circulation

The fan-forced air circulation and efficient temperature recovery properties allow for precise temperature conditions.

Efficient and Superior Upright Pharmaceutical Refrigerator

High performance compressors and components deliver fast temperature pull-down, recovery and tolerance for high ambient temperature conditions. This energy efficient system improves LEED scores and contributes to global sustainability.

Energy Saving Pharmaceutical Refrigerator

The MPR-1412-PA is a large capacity pharmacy refrigerator delivering a stable and reliable environment for managing clinical, pharmaceutical and biomedical storage and processing at uniform temperatures. Easy to use features and design and precise temperature control with fast recovery following door openings, assures safe storage during frequent access and high ambient conditions.

SNAP Refrigerants and PHC Compliance with EPA Recommendations

Model MPR-1412-PA operates on new generation SNAP compliant, low flammability HFO refrigerants to assure low environmental impact. The use of SNAP compliant refrigerants (Significant New Alternatives Policy) established by the United States Environmental Protection Agency underscores our recognition of social responsibility and environmental sustainability by integrating the latest refrigeration technology. For information on SNAP refrigerants visit https://www.epa.gov/snap.

Adjustable Design

This CDC compliant lab refrigerator offers a practical solution for storage with adjustable shelves and a wide setpoint range for varying laboratory applications, including biomedical storage and processing. The interior layout makes it ideal for running experiments that require changeable shelf configurations. The shelves can be arranged to accommodate all heights, and deep and strong enough to hold processing equipment and most devices.

Cycle Defrost System

Defrosting is performed automatically and only when required, protecting contents against unnecessary temperature rise. The defrosting heater provides protection from freezing in extremely low ambient temperature conditions.

Microprocessor Controller and Alarms

The temperature control system, with a microprocessor, maintains true temperature at the set level and is unaffected by outside ambient temperature. Audible and flashing LED visual alarms alert the user to the unlikely event of either a high or low temperature status.

Uniform Temperature with Forced Air Circulation

The fan-forced air circulation and efficient temperature recovery properties allow for precise temperature conditions.

Efficient and Superior Pharmaceutical Refrigerator

High performance compressors and components deliver fast temperature pull-down, recovery and tolerance for high ambient temperature conditions. This energy efficient system improves LEED scores and contributes to global sustainability.

Energy Saving Pharmacy Refrigerator

The MPR-1412R-PA is a pharmacy grade refrigerator delivering a stable and reliable environment for managing clinical, pharmaceutical and biomedical storage and processing at uniform temperatures. Easy to use features and design and precise temperature control with fast recovery following door openings, assures safe storage during frequent access and high ambient conditions.

SNAP Refrigerants and PHC Compliance with EPA Recommendations

Model MPR-1412R-PA operates on new generation SNAP compliant, low flammability HFO refrigerants to assure low environmental impact. The use of SNAP compliant refrigerants (Significant New Alternatives Policy) established by the United States Environmental Protection Agency underscores our recognition of social responsibility and environmental sustainability by integrating the latest refrigeration technology. For information on SNAP refrigerants visit https://www.epa.gov/snap.

Adjustable Design

This large capacity laboratory refrigerator offers a practical solution for storage with adjustable shelves and a wide setpoint range for varying laboratory applications, including biomedical storage and processing. The interior layout makes it ideal for running experiments that require changeable shelf configurations. The shelves can be arranged to accommodate all heights, and deep and strong enough to hold processing equipment and most devices.

This model is fitted with painted steel pull out drawers. They allow convenient and space efficient storage and are deep enough to hold bulk items.

Cycle Defrost System

Defrosting is performed automatically and only when required, protecting contents against unnecessary temperature rise. The defrosting heater provides protection from freezing in extremely low ambient temperature conditions.

Microprocessor Controller and Alarms

The temperature control system, with a microprocessor, maintains true temperature at the set level and is unaffected by outside ambient temperature. Audible and flashing LED visual alarms alert the user to the unlikely event of either a high or low temperature status.

Uniform Temperature with Forced Air Circulation

The fan-forced air circulation and efficient temperature recovery properties allow for precise temperature conditions.

Efficient and Superior Pharmaceutical Refrigerator

High performance compressors and components deliver fast temperature pull-down, recovery and tolerance for high ambient temperature conditions. This energy efficient system improves LEED scores and contributes to global sustainability.