Gas Turbine Filtration
30/30 GT
Advantages
• High mechanical strength
• Rigid, reinforced water resistant cardboard frame
• Large media surface
• Unique radial pleat design
• Bonded into case to eliminate air bypass
• Compact
Application: Suitable for most areas
Type: Pleated Panel
Frame: Water resistant cardboard
Media: Cotton/Synthetic
Rec. final pressure drop: 250 Pa/1.0” wg
Temperature max: 70ºC/158ºF
Mounting/Frames: Universal frame or clip
Additional information: Different clips available for mounting combinations with different filters
The 30/30GT® has been setting the standard for G4/MERV 8 panel pre-filters. The combination of the unique media, robust construction and pleating technology makes the Camfil 30/30GT a low pressure drop pre-filter that performs well in all situations
CamClose
Advantages
• Clip-on design
• Optimal coalescing performance
• High strenght plastic frame
• Downstream pleat separators
• Can be fitted directly to a final filter
Application: Suitable for most areas including wet and coastal
Type: Pleated Panel
Frame: Plastic moulded
Gasket: Polyurethane, endless foamed
Media: Glass fiber, Synthetic
Rec. final pressure drop: 400 Pa
Temperature max: 70ºC
Mounting/Frames: Integrated clip on / optional without clip. Separate metal clips available
Additional information: External dimensions Std. 598x604x129
The Camfil CamClose is primarily used as a pre-filter to extend the service life of final filters by offering low initial pressure drop and high dust capacity. The filter is specially suitable for applications in humid conditions, like tropical and coastal installations, thanks to its downstream pleat separators and built-in drainage.
Cam-Flo XMGT
Advantages
• Non discharging synthetic media
• Maximum surface use
• High mechanical strength
• Incinerable bags
• High dust holding capacity = long life
• Recommended choice for gas turbine pre-filtration
Application: Installations exposed to turbulence and harsh environments
Type: Bag Filter
Frame: Galvanised steel
Media: Synthetic
Dimensions: Filter front dimensions according EN 15805
Rec. final pressure drop: 450 Pa
Temperature max: 70°C
Additional information: Available in half – and special size filters on
request
The Cam-Flo XMGT filter is a sturdy bag filter, recommended in areas where considerations for high humidity and/or turbulence is important. The filter has a synthetic fibre media with unique properties, effectively removing harmful particles from the air. Self-supporting bags and a unique design make this filter an excellent pre-filter and coalescer choice for turbomachinery applications.
Cam-Flo GT Hybrid
Advantages
• Hybrid Technology media
• Maximum surface use
• High mechanical strength
• Incinerable bags
• High dust holding capacity = long life
• Recommended choice for gas turbine pre-filtration
Application: Installations exposed to turbulence and harsh environments
Type: Bag Filter
Frame: Galvanised steel
Media: Hybrid Synthetic and Glass Technology
Rec. final pressure drop: 450 Pa
Temperature max: 70°C
Additional information: Available in half – and special size filters on request
The Cam-Flo Hybrid is a new generation of premium bag filters for gas turbines that utilize the breakthrough Hybrid media technology to combine glass fiber and synthetic fibers. The results is a smart solution for an extended filter life, a stable and predictable performance, and most of all, carefree operations. Self-supporting bags and a unique design make this filter an excellent pre-filter and
coalescer choice for turbomachinery applications.
Cam-Flo GT HV
Advantages
• Non discharging synthetic media
• Maximum surface use
• High mechanical strength
• Incinerable bags
• High dust holding capacity
• Designed for high velocity applications
• Solid frame in stainless steel
Application: High velocity applications. 5500-7200m³/h
Type: Bag Filter
Frame: Stainless steel, Galvanised steel
Media: Synthetic
Rec. final pressure drop: 875 Pa
Temperature max: 70°C
EN779-2012: efficiency: F7@4250 m³/h, M6@7200m³/h
Additional information: Other sizes available on request
The Cam-Flo GTX7 is an efficient air inlet filter for gas turbines, compressors and diesel engines. The Cam-Flo GTX7, in combination with the CamGuard, gives excellent filtration benefits with improved engine protection and no need for costly shutdowns.
CamGuard
Advantages
• Allows on-line filterreplacement
• Extends filter life
• Reduced overall TCO
• Solid corrosion resistant frame in stainless steel
Application: High velocity air inlet systems. Typical coastal and offshore environments
Type: Bag Filter
Frame: Stainless steel
Media: Synthetic
Temperature max: 70°C
Additional information: Designed for use in combination with Cam- Flo GT HV
The CamGuard is a coarse filter that is installed downstream of the Cam-Flo GTX7, allowing online filter replacement thus reducing costly downtime.
Hi-Cap GT
Advantages
• High dust holding capacity
• Resistant media
• Tapered pockets
• Low pressure drop
• Incinerable bags
Application: Installations exposed to turbulence and/or recurrent high humidity
Type: Bag Filter
Frame: Galvanised steel, Plastic moulded
Gasket: Polyurethane
Media: Synthetic
Rec. final pressure drop: 250 Pa
Temperature max: 70°C
Hi-Cap GT is a high quality filter, available for the removal of coarse particles. It allows for a secure and efficient filtration in industrial environments where large amounts of dust are present. Long experience and continuous R&D has optimised the product for impressive filtration at a low cost.
CamGT 3V-600
Advantages
• Low air resistance (dP) for optimal economy
• Ensures water drainage
• High filtration efficiency
• Low air resistance also in wet/ dry conditions
• Solid HEPA frame eliminates air bypass
• Resistant to high and extreme pressure drops
• Suitable for all environment
Application: All installations where safety/reliability is crucial in combination with low air resistance
Type: Compact Pleated Filter
Frame: Plastic moulded
Gasket: Polyurethane, endless foamed
Media: Glass fiber
Separator: Hot Melt
Sealant: Polyurethane
Grille, Downstream: Support grid for filtermedia
Rec. final pressure drop: 600 Pa
Temperature max: 70°C
Burst strength: > 6250 Pa continuous wet/soaked
The CamGT 3V-600 is built on a solid 600 mm deep frame with extended media area. The unique design provides industry-leading pressure drop and dust holding capacity ensuring optimum perfomance, low average pressure drop and a long filter life. The filter is also available with CamBrane media in E12 efficiency.
CamGT 4V-300
Advantages
• Ensures water drainage
• High filtration efficiency
• Low pressure drop also in wet conditions
• Resistant to turbulence and extreme pressure drop
• Easy mounting
• Meets the industry’s latest and most stringent requirements
• Water resistant media
Application: All installations where safety/reliability is important
Type: Compact Pleated Filter
Frame: Plastic moulded
Gasket: Polyurethane, endless foamed
Media: Glass fiber
Separator: Hot Melt
Sealant: Polyurethane
Grille, Downstream: Support grid for filtermedia
Rec. final pressure drop: 600 Pa
Temperature max: 70°C
Fire rating: Available according to DIN4102 class b2 rating on
request
Burst strength: > 6250 Pa continuous wet/soaked
Reverse flow version: With support grid available on request
Additional information: Also available in 1/2 and 3/4 size on request
CamGT 4V-300 is a high efficiency air inlet filter used for second and/or third stage filtration, depending on the gas turbine air inlet system. Typical range from M6 or MERV 11 up to E12 (EPA level), for the best gas turbine protection. Also available in versions with Fire rating DIN4102 class b2, Reverse flow, half-size and 3/4 size on request.
CamPGT
Advantages
• Low pressure drop
• Easy mounting
• Light weight construction
• Improves overall filter economy
• Fully incinerable
Application: Suitable for demanding operating conditions like heavy polluted rural or industrial areas
Type: Compact Pleated Filter
Frame: Plastic moulded
Gasket: Polyurethane, endless foamed
Media: Glass fiber
Separator: Hot Melt Separator Technology
Rec. final pressure drop: 450 Pa
Temperature max: 70ºC
The CamPGT is an energy efficient solution functioning as a high efficiency filter in Camfil medium velocity multistage inlet houses. It is intended for inland industrial and rural areas. Its unique geometry provides a large inlet area and optimized air flow, thus offering a lower pressure drop than industry standard for V-shaped barrier filters.
CamGT Box Type Green II
Advantages
• Ensures water drainage
• High filtration efficiency
• Low pressure drop also in wet conditions
• Resistant to turbulence and high pressure drop
• Easy mounting
• Water resistant media
Application: All installations where safety/reliability is important
Type: Compact Pleated Filter
Frame: Plastic moulded
Gasket: Polyurethane, endless foamed
Media: Glass fiber
Separator: Hot Melt Separator Technology
Rec. final pressure drop: 600 Pa
Temperature max: 70°C
Additional information: XL version available on request. Profile placed at 292 mm depth for clamping, i.e for fastener spring type C-80 CamGT Box Type Green is a high-capacity filter for turbomachinery. Thanks to the unique design, its performance is maintained in humid or wet conditions, guaranteeing a long lifetime and a good filter economy.
CamGT Box Type Green is a high-capacity filter for turbomachinery. Thanks to the unique design, its performance is maintained in humid or wet conditions, guaranteeing a long lifetime and a good filter economy.
TurboPac
Advantages
• Flanges on one or both sides
• Media pack protected by face guards
• Rigid design
• Water repellent media
• High dust holding capacity = long life
Application: All installations where safety/reliability is important
Type: Compact Pleated Filter
Frame: Galvanised steel
Media: Glass fiber
Separator: Aluminium
Rec. final pressure drop: 450 Pa
Temperature max: 70ºC
Additional information: XL version available on request. Profile placed at 292 mm depth for clamping; i.e for fastener spring type C-80 TurboPac barrier filters are engineered to provide optimum performance under severe turbo machinery applications such as high face velocity, turbulence and surging airflows, heavy dust and high humidity.
TurboPac barrier filters are engineered to provide optimum performance under severe turbo machinery applications such as high face velocity, turbulence and surging airflows, heavy dust and high humidity.
CamPulse GTC
Advantages
• HemiPleat ™technology proven open pleat solution
• Non discharging F9
• Water resistant media
• Improved dust release
• 2 in 1 package – saves space and money
• Optimal ability to handle daily fog and humidity
• Helicord design for efficient pulse cleaning
Application: For humid/dry heavy dust load areas. Our recommended choice for one-stage self cleaning air intake systems
Type: Pleated Cylinder
Media: Synthetic
Temperature max: 70º C
Pleat: HemiPleat
End caps: Available Galvanized steel (Standard), Powder coated, Stainless steel AISI304, Stainless steel AISI 31
Liners: External helical cords and internal screen, secure the filter element from movement without obstruction to the pulse
Additional information: Available in Co/Cy, Tenkay, as dimple pleat
and in other dimensions on request
Our conical-cylindrical air inlet filters are available in vertical or horizontal designs, to best suit your system of choice. With our broad range of media, including EPA filters, we can offer an air inlet pulse filter for every environment and every gas turbine inlet. Camfil CamPulse with proven HemiPleat™ technology, combined with a synthetic media, delivers valuable benefits to gas turbine operation and maintenance.
CamPulse GTD
Advantages
• HemiPleat ™technologyproven open pleat solution
• Non discharging F9
• Improved dust release
• Water resistant
• 2 in 1 package – saves space and money
• Helical design for efficient pulse cleaning
Application: For desert/dry/ heavy dust load areas
Type: Pleated Cylinder
Media: Synthetic
Temperature max: 70º C
Pleat: HemiPleat
Additional information: Available in Galvanized steel (Standard), Powder coated, Stainless steel AISI304, Stainless steel AISI 31
Liners: External helical cords and internal screen secure the filter element from movement without obstruction to the pulse
Test information: Tested according to ARAMCO spec. 32-SAMSS-008
Additional information: Available in Co/Cy, Tenkay, as dimple pleat and in other dimensions on request
Our conical-cylindrical air inlet filters are available in vertical or horizontal designs, to best suit your system of choice. With our broad range of media, including EPA filters, we can offer an air inlet pulse filter for every environment and every gas turbine inlet. Camfil CamPulse with proven HemiPleat™ technology, combined with a synthetic media, delivers valuable benefits to gas turbine operation and maintenance.
CamPulse GT Polytech HE
Advantages
• Patented HemiPleat™ technology- proven open
• Water repellent media protected by metal liners
• Each filter set is shipped together in one carton
• Galvanized metal finish
• Self-cleaning air filter cartridges
• Improved air distribution
• Suitable also in high humidity conditions
• Suitable as prefilter for filter class E10, E12
• Increased air to cloth ratio thanks to Hemi-Pleat ™technology.
Application: For desert/dry/ heavy dust load areas
Type: Pleated Cylinder
Media: Polytech HE
Temperature max: 70º C
Pleat: HemiPleat
Additional information: Available as dimple pleated and in fire retardant version on request
CamPulse EF
Advantages
• Self-cleaning air filter cartridges
• High filtration efficiency
• Effective dust holding capacity
• Built-in structural strength
• Galvanized metal finish
• Media protected by metal liners on both sides
Application: Desert and arctic environments
Type: Pleated Cylinder
Media: Synthetic
Rec. final pressure drop: 1000
Temperature max: 70º C
Caps: Galvanized (Standard), stainless steel (AISI304 / 316) or powder coated
Fire rating: Available according to DIN 4102-b2
Holding frames: Various on request
CamPulse filter systems are designed to protect rotating machinery in high dust load environments. The cleaning system provides continuous operation and stable pressure even in extremely dusty environments.
Tenkay
Advantages
• High filtration efficiency
• Excellent energy performance
• Long life
• Continuous one-piece gasket
• Factory bonded steel top and bottom headers
• Pleated media
• Helical cord retainer
Application: For desert/dry/ heavy dust load areas
Type: Pleated Cylinder
Media: Synthetic, Polytech HE
Rec. final pressure drop: 600
Temperature max: 70º C
Size: Standard 34”, 22” and 27” on request
Additional information: Also available as CamBrane E12, Goldcone, Fires retardant and eXtreme versions on request.
The Tenkay filters for turbomachinery provide enhanced performance and longer service life, thanks to greater media utilization and more effective filtration. The HemiPleat™ separator bead opens up the pleats uniformly, allowing more effective cleaning, low pressure drop and long life.
CamPulse CamBrane
Advantages
• Water and salt resistant filter
• Non discharging EPA filter
• Optimized Sandwich construction for long life
• EPA high efficient membrane media
• 2 in 1 package – saves space and money
• HemiPleat ™technologyproven open pleat solution
Application: For humid/desert/dry/ heavy dust load areas
Type: Pleated Cylinder
Media: Membrane
Temperature max: 70ºC
Pleat: HemiPleat
End caps: Available in Galvanized steel (Standard), Power coated, Stainless steel AISI304, Stainless steel AISI 316
Additional Information: Also available as Cylindrical/Conical
The CamBrane combines a variety of filtration technologies into one unique composite media tailored for the tough requirements of modern gas turbines. The synthetic pre-filter layer is extremely efficient on small particles, hydrocarbons and airborne salt while the membrane layer adds a barrier to submicron particles and stops water and salt from penetrating the filter. CamBrane offers best-in class protection at lowest possible air flow restriction.